メインコンテンツにスキップ
英語
中国語

手順 9を翻訳中

手順9
Grab both pull tabs at the same time, and slowly pull to stretch the adhesive away from the battery, toward the top of the iPhone. Follow the same procedure as with the previous strip: don't press down on the battery, keep the strip flat and unwrinkled, and pull at a low angle. If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but do not pry under the battery.
Remove the top adhesive strip
  • Grab both pull tabs at the same time, and slowly pull to stretch the adhesive away from the battery, toward the top of the iPhone.

  • Follow the same procedure as with the previous strip: don't press down on the battery, keep the strip flat and unwrinkled, and pull at a low angle.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but do not pry under the battery.

  • If the adhesive breaks off underneath the battery and can't be retrieved, continue with the next step.

同时抓住两个拉环,然后慢慢拉以将粘合剂从电池向iPhone顶部拉开。

请遵循与之前的试纸条相同的步骤:不要向下压电池,保持试纸条平整且无皱纹,并以低角度拉扯。

如果胶条断裂,请尝试用手指或钝镊子将其取回,然后继续拉动,但请勿在电池下方撬动。

如果胶粘剂在电池下方脱落并且无法回收,请继续下一步。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります