メインコンテンツにスキップ
英語
日本語

手順 3を翻訳中

手順3
Strip all the wires out from both cables using a wire stripper. You'll need about three quarters of an inch of exposed copper wire. If you don't have a wire stripper, you can strip the wires the same way as you exposed these wires. Gently cut the outer insulation, then pull off the insulation.
  • Strip all the wires out from both cables using a wire stripper. You'll need about three quarters of an inch of exposed copper wire.

  • If you don't have a wire stripper, you can strip the wires the same way as you exposed these wires. Gently cut the outer insulation, then pull off the insulation.

  • When stripping wires, do not cut or damage the copper wires. If you do damage the wire, cut off the damaged portion and try again.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります