メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Using a spudger, push one of the metal rods on either side of the RAM stick away from it until you hear a light clicking noise. Repeat this procedure on the other metal rod on the opposite side of the RAM stick. If you push both metal rods away from the RAM stick as directed, the RAM stick will pop up at an angle.
  • Using a spudger, push one of the metal rods on either side of the RAM stick away from it until you hear a light clicking noise. Repeat this procedure on the other metal rod on the opposite side of the RAM stick.

  • If you push both metal rods away from the RAM stick as directed, the RAM stick will pop up at an angle.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります