メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての47個のガイドに反映されます。

英語
スペイン語

手順 3を翻訳中

手順3
During reassembly, gently push down the center of the lower case to reattach the two plastic clips. The lower case is connected to the upper case at the center, with two plastic clips. The lower case is connected to the upper case at the center, with two plastic clips.
  • During reassembly, gently push down the center of the lower case to reattach the two plastic clips.

  • The lower case is connected to the upper case at the center, with two plastic clips.

La tapa inferior se une con el cuerpo en el centro, con dos clips de plástico.

Durante el reensamblaje, empuja suavemente hacia abajo el centro de la tapa inferior para volver a sujetar con los dos clips de plástico.

-[* icon_note] The lower case is connected to the upper case at the center, with two plastic clips.
[* icon_reminder] During reassembly, gently push down the center of the lower case to reattach the two plastic clips.
+ [* red] The lower case is connected to the upper case at the center, with two plastic clips.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります