Skip to main content
英語
日本語

手順 3を翻訳中

手順3
Pull the IO Bezel off. Don't forget to tighten the screws on the bottom case back up if you won't be removing it later.
  • Pull the IO Bezel off. Don't forget to tighten the screws on the bottom case back up if you won't be removing it later.

  • Getting the IO Bezel back in can be a bit tricky. If you have trouble, you can remove the entire bottom shield to make the task a snap.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります