Skip to main content
英語
日本語

手順 3を翻訳中

Step 3
Once all wires and screws have been removed, gently take the motherboard out of the printer. These wires are soldered onto the bottom of the PCB and must be de-soldered in order to completely detach the motherboard from the printer.
  • Once all wires and screws have been removed, gently take the motherboard out of the printer.

  • These wires are soldered onto the bottom of the PCB and must be de-soldered in order to completely detach the motherboard from the printer.

  • If you do not know how to operate a soldering iron, do not attempt to finish this guide.

  • De-solder these eight solder joints on the bottom of the motherboard.

  • When reinstalling the motherboard back into the printer, solder the highlighted joints (in orange markers in the second photo) back onto the board.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります