メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての3個のガイドに反映されます。

英語
日本語

手順 1を翻訳中

手順1
Using the Phillips #0 screwdriver, remove the single screw from the bottom of the device. Pull out the slot with the battery (pictured in the third photo). Leave both the battery and the slot organized on the side with the removed screw. Pull out the slot with the battery (pictured in the third photo). Leave both the battery and the slot organized on the side with the removed screw.
  • Using the Phillips #0 screwdriver, remove the single screw from the bottom of the device.

  • Pull out the slot with the battery (pictured in the third photo). Leave both the battery and the slot organized on the side with the removed screw.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります