メインコンテンツにスキップ
英語
ドイツ語

手順 2を翻訳中

手順2
Use a T5 Torx screwdriver to remove the two 3.3 mm screws securing each hinge to the kickstand. Support the kickstand from behind to prevent damage to the hinges while removing the screws.
Unscrew the kickstand
  • Use a T5 Torx screwdriver to remove the two 3.3 mm screws securing each hinge to the kickstand.

  • Support the kickstand from behind to prevent damage to the hinges while removing the screws.

  • Do not remove the kickstand yet.

  • The kickstand remains held in place by two flexible appendages between the hinges.

Entferne die vier 3,3 mm Torx T5 Schrauben, jeweils zwei auf jeder Seite der Stütze.

-[* red] Remove the four 3.3 mm T5 screws—two on each side of the kickstand.
+[title] Unscrew the kickstand
+[* red] Use a T5 Torx screwdriver to remove the two 3.3 mm screws securing each hinge to the kickstand.
+ [* icon_note] Support the kickstand from behind to prevent damage to the hinges while removing the screws.
+[* icon_caution] Do not remove the kickstand yet.
+ [* icon_note] The kickstand remains held in place by two flexible appendages between the hinges.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります