メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 2を翻訳中

手順2
The screen is partially attached to the motherboard with adhesive, so gently slide the tweezers underneath the entire screen to detach it, then lift it up. The screen is made out of thin glass, so make sure not to be too rough. After this step, the screen should still be connected to the motherboard through a small black hinge. This piece should NOT be removed/cut.
  • The screen is partially attached to the motherboard with adhesive, so gently slide the tweezers underneath the entire screen to detach it, then lift it up.

  • The screen is made out of thin glass, so make sure not to be too rough.

  • After this step, the screen should still be connected to the motherboard through a small black hinge. This piece should NOT be removed/cut.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります