メインコンテンツにスキップ
英語
日本語

手順 19を翻訳中

手順19
Here's the PCB flipped up and away from the camera chassis.
  • Here's the PCB flipped up and away from the camera chassis.

  • Note: there are 2 flex circuit paths connecting the circuit board to the chassis - they are soldered and can't be detached without re-soldering. Be careful not to bend the flex circuit too severely or it may break. I had to resolder one of the connections after I was done.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります