メインコンテンツにスキップ
英語
日本語

手順 6を翻訳中

手順6
Remove circuit boards by pulling the top and bottom lever out simultaneously to disconnect the backplane connection. When the card is disconnected from the backplane, slide the board out of the cage and store it in a safe place. The safest place to store a circuit board is inside the machine. If a board needs to be stored outside of the machine, place it in a shielded, conductive bag, and wrap it in bubble wrap.
  • Remove circuit boards by pulling the top and bottom lever out simultaneously to disconnect the backplane connection.

  • When the card is disconnected from the backplane, slide the board out of the cage and store it in a safe place.

  • The safest place to store a circuit board is inside the machine. If a board needs to be stored outside of the machine, place it in a shielded, conductive bag, and wrap it in bubble wrap.

  • It is easier to remove a board next to an empty slot. If a board is sandwiched, especially the memory board (first slot) or display generator board (last slot), remove the adjacent board first.

  • When all boards have been removed, admire the backplane and blower.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります