メインコンテンツにスキップ
英語
イタリア語

手順 3を翻訳中

手順3
Use the point of a spudger to pry up and disconnect the left squeeze sensor connector from its socket on the motherboard above the battery. Repeat the procedure for the right squeeze sensor connector near the power button. Repeat the procedure for the right squeeze sensor connector near the power button.
  • Use the point of a spudger to pry up and disconnect the left squeeze sensor connector from its socket on the motherboard above the battery.

  • Repeat the procedure for the right squeeze sensor connector near the power button.

Usa la punta di uno spudger per staccare e scollegare il connettore del sensore di pressione sinistro dal suo zoccolo sulla scheda madre, sopra la batteria.

Ripeti la procedura per il connettore del sensore di pressione di destra, vicino al pulsante di accensione.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります