メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 3を翻訳中

手順3
Clean up any flux you might have used and since the board is out you might as well give it a good clean with a electronic cleaner or high content isopropyl alcohol. Reassemble the rumble pak and screw in the gamebit screws.
Clean up/Reassembly
  • Clean up any flux you might have used and since the board is out you might as well give it a good clean with a electronic cleaner or high content isopropyl alcohol.

  • Reassemble the rumble pak and screw in the gamebit screws.

  • Having the battery compartment void of batteries causes you to hear the rattling of the battery terminals. I've invested in a set of 2 AAA dummy batteries to fill the compartment which will eliminate the sound by applying pressure to the once used battery springs. Anything can be used here really but I went for the exact fit in this case. The

  • rumble pak is relatively light without batteries and the dummy battery will help add some of it's original weight back.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります