メインコンテンツにスキップ
英語
中国語

手順 2を翻訳中

手順2
Before you begin, figure out how the pre-cut adhesive strip should be oriented and which surface to attach it to. If your pre-cut adhesive has pull tabs facing the center hole, the adhesive will attach to the phone's battery well first. If your pre-cut adhesive strip has pull tabs on the outer perimeter, the adhesive will attach to the battery first.
  • Before you begin, figure out how the pre-cut adhesive strip should be oriented and which surface to attach it to.

  • If your pre-cut adhesive has pull tabs facing the center hole, the adhesive will attach to the phone's battery well first.

  • If your pre-cut adhesive strip has pull tabs on the outer perimeter, the adhesive will attach to the battery first.

  • Peel the clear plastic liner off of the pre-cut adhesive strip, exposing the adhesive.

  • Line up a long edge of the adhesive with the proper surface, as determined above.

  • Carefully set the adhesive down on the surface.

  • The adhesive is very sticky, so you have only one chance to align it.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります