手順 3を翻訳中
手順3
-
Take a small piece of the Low-Density Foam Weatherstrip Tape and place it, sticky side down, in the center of the controller.
-
Replace the battery.
-
Reconnect the USB and GENTLY press the battery into the controller while the USB is connected. This will allow you to see if the fix worked. NOTE- it takes a second or so for the light on the USB cable to come on after the controller powers on.
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。