手順 1を翻訳中
手順1
Troubleshooting
-
If you've already checked different cords for your controller then you are probably already suspecting something wrong with the USB port on your controller.
-
Using a voltmeter set to check continuity, check each pin inside the female USB connector with it's corresponding gold contact on the board.
-
On the board with the connector facing away from you, the 4 gold contacts are to the right of the connector labeled V, G, D+, and D-. With the connector still faced away from you, the pins for the connector are in order 1-5.
-
Pin 1 = V
-
Pin 2 = D-
-
Pin 3 = D+
-
Pin 4 = G
-
Pin 5 = G
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。