メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

英語
日本語

手順 11を翻訳中

手順11
Pry out this little tab, to remove the wireless card. There's no wired antenna (It's on the board), so you can literally yank it out. There are a few silver screws holding down the plastic shield. Remove them, then you can unclip the shield. (Should be pretty obvious) There are a few silver screws holding down the plastic shield. Remove them, then you can unclip the shield. (Should be pretty obvious)
Removing WiFi Card + Shield
  • Pry out this little tab, to remove the wireless card. There's no wired antenna (It's on the board), so you can literally yank it out.

  • There are a few silver screws holding down the plastic shield. Remove them, then you can unclip the shield. (Should be pretty obvious)

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります