メインコンテンツにスキップ

iPad Mini CDMA LCD Replacement

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての38個のガイドに反映されます。

手順 1を翻訳中

英語
オランダ語
手順1
iPad Mini CDMA LCD Replacement: 手順 0、 2の画像 1 iPad Mini CDMA LCD Replacement: 手順 0、 2の画像 2
  • Use a plastic opening tool to pry the LCD connector from its socket on the logic board.

  • Do not pry against the large IC next to the connector, or you may break it. Gently pry from the side of the connector as shown.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります