メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

英語
日本語

手順 1を翻訳中

手順1
Carefully insert the new SSD into the adapter, using the length of old drive as a reference for when the SSD is fully in the adapter.  The lengths should be the same. Insert the SSD and the adapter into the Socket, pushing inward in a straight fashion.
  • Carefully insert the new SSD into the adapter, using the length of old drive as a reference for when the SSD is fully in the adapter. The lengths should be the same.

  • Insert the SSD and the adapter into the Socket, pushing inward in a straight fashion.

  • When reinstalling the SSD, be sure it is properly seated before reinstalling its retaining screw.

  • NVMe Drives can cause kernel panics due to sleep /hibernation issues. This can be turned off with the following command.

  • From a Terminal, use the following command to disable hibernation: ----"sudo pmset -a hibernatemode 0" ---- If you later want to enable hibernation, use: "sudo pmset -a hibernatemode 3"

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります