修理を始めるには コミュニティ ストア

注意：あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての42個のガイドに反映されます。

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 13を翻訳中

手順13
Leave the opening pick in the iPad slightly past the front-facing camera. Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive. Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

  • Leave the opening pick in the iPad slightly past the front-facing camera.

  • Take a second pick and insert it to the left of the camera, where the first pick just was. Slide it back to the corner to completely cut any remaining adhesive.

  • Leave the second pick in place to prevent the corner adhesive from re-sealing as it cools.

Lascia il plettro infilato nell'iPad appena oltre la fotocamera frontale.

Prendi un altro plettro e infilalo a sinistra della fotocamera, dove sei già passato con il primo plettro. Fai scorrere questo plettro tornando indietro verso l'angolo in alto a sinistra per tagliare l'adesivo rimasto.

Lascia il secondo plettro infilato sotto l'angolo per evitare che l'adesivo si reincolli.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。