メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての42個のガイドに反映されます。

英語
イタリア語

手順 27を翻訳中

手順27
The front-facing camera housing may stick to the front panel; peel up the housing and place it back over the camera to protect it. Rock the camera housing up on one edge to free it from the adhesive and remove it from the front panel. Return the front-facing camera housing to its recess in the rear case.
  • The front-facing camera housing may stick to the front panel; peel up the housing and place it back over the camera to protect it.

  • Rock the camera housing up on one edge to free it from the adhesive and remove it from the front panel.

  • Return the front-facing camera housing to its recess in the rear case.

Il supporto della fotocamera frontale potrebbe restare incollato al pannello anteriore: rimuovilo e rimettilo sulla fotocamera per proteggerla.

Fai oscillare il supporto attorno a uno dei suoi bordi per liberarlo dall'adesivo e poi rimuovilo dal pannello anteriore.

Rimetti il supporto della fotocamera frontale nel suo alloggio nel case posteriore.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります