メインコンテンツにスキップ
英語
日本語

手順 28を翻訳中

手順28
Lift the bottom edge of the battery up slightly. Do not hinge the battery beyond 45 degrees, or you risk damaging the inter-cell connectors.
  • Lift the bottom edge of the battery up slightly.

  • Do not hinge the battery beyond 45 degrees, or you risk damaging the inter-cell connectors.

  • Use tweezers or your fingers to peel the single clear plastic covering off of the entire bottom side of the battery.

  • At this point, the battery's four adhesive strips are exposed. Be careful handling the battery and try not to touch the strips.

  • Align the battery such that it falls in place with the screw post near the Smart Connector.

  • Be sure not to trap the Smart Connector cable underneath the battery.

  • Gently lay the battery down into its recess and press it firmly into place.

  • For optimal performance, calibrate your newly installed battery after completing this guide: Charge it to 100% and keep charging it for at least 2 more hours. Then use your device until it shuts off due to low battery. Finally, charge it uninterrupted to 100%.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります