メインコンテンツにスキップ
英語
日本語

手順 26を翻訳中

手順26
The next steps detail how to install a new battery. Never reinstall a used battery. Thoroughly clean the back case of all adhesive residue.
Replacement battery installation information
  • The next steps detail how to install a new battery. Never reinstall a used battery.

  • Thoroughly clean the back case of all adhesive residue.

  • Apply adhesive remover or high concentration (over 90%) isopropyl alcohol to the residue.

  • Use an opening tool to scrape and loosen the residue.

  • Be sure to wipe the residue away in one direction to prevent smearing.

  • It is easier to wipe off the residue when it is sufficiently soaked. Once it starts drying up, the residue becomes incredibly tacky.

  • If you used adhesive remover, be sure to wipe the surface down with isopropyl alcohol to remove any adhesive remover residue.

  • You can remove the masking tape as well as any protective gear once you are done cleaning.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります