メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
イタリア語

手順 9を翻訳中

手順9
Lift the display assembly from its top edge and carefully slide it up (towards the front-facing camera and headphone jack), until the screw that secures the battery power connector is revealed at the bottom. Don't lift the display more than 70° or you may damage the attached ribbon cables. Don't lift the display more than 70° or you may damage the attached ribbon cables.
  • Lift the display assembly from its top edge and carefully slide it up (towards the front-facing camera and headphone jack), until the screw that secures the battery power connector is revealed at the bottom.

  • Don't lift the display more than 70° or you may damage the attached ribbon cables.

Solleva lo schermo dal suo bordo superiore e fallo scorrere verso l'alto dell'iPad (verso la fotocamera frontale e la presa jack) fino a rivelare la vite in basso che tiene fermo il connettore della batteria.

Non piegare lo schermo più di 70° o potresti danneggiare i cavi a nastro che lo collegano.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります