メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての21個のガイドに反映されます。

英語
日本語

手順 2を翻訳中

手順2
If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.
Create an opening gap
  • If your iPad's screen is badly cracked, wear skin and eye protection. Cover the screen with a smooth layer of clear packing tape to contain glass shards and help the suction cup adhere. Alternatively, use a strong piece of tape (such as duct tape) and fold it into a handle.

  • Place a suction cup next to the iPad's home button and press down to create a seal.

  • To get the most leverage, place the suction cup as close to the edge as possible without going past the edge of the display.

  • Firmly pull up on the suction cup to create a small gap between the front panel and the rear case.

  • Don't pull too hard, or you may shatter the glass. If necessary, apply more heat to further soften the adhesive.

  • Once you've opened a sufficient gap, insert an opening pick into the gap.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります