英語
日本語

手順 4を翻訳中

手順4
Pry the upper and the lower part of the upper housing apart using a plastic pry tool. Do so in a motion that pushes the upper half inwards (towards the electronics), so as to unlatch the little plastic latches (see next photo) before pulling the halves apart. There is one latch towards the front (lens side) of the flash on either side. After loosening both the upper part of the housing can be removed. Remove the upper half of the cover completely.
Remove upper cover
  • Pry the upper and the lower part of the upper housing apart using a plastic pry tool. Do so in a motion that pushes the upper half inwards (towards the electronics), so as to unlatch the little plastic latches (see next photo) before pulling the halves apart.

  • There is one latch towards the front (lens side) of the flash on either side. After loosening both the upper part of the housing can be removed.

  • Remove the upper half of the cover completely.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります