メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての16個のガイドに反映されます。

英語
中国語

手順 1を翻訳中

手順1
Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly. There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.
  • Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.

  • There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

使用撬棒扁平一端来将前置摄像头从显示组件的插座中撬出。

[* black] Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.
+ [* icon_caution] There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります