手順番号1–Acer Aspire 5742 Screen Assembly Replacementを翻訳 - iFixit

修理を始めるには

修理する権利

ストア

ガイドに戻る

英語

日本語

手順 1を翻訳中

手順1

Note how the cables leading into each of the hinges are routed, then release them from their guides.

Whilst supporting the lid, remove 2 screws from each hinge. You will now be able to lift the lid assemble away from the body.

Removing the screen assembly

Note how the cables leading into each of the hinges are routed, then release them from their guides.
Whilst supporting the lid, remove 2 screws from each hinge. You will now be able to lift the lid assemble away from the body.
The hinge screws screw into brass bushes set in plastic pillars attached to the base of the laptop case. A common fault is that these pillars break away from the base leaving the hinge largely unsupported. Take care not to strain the other hinge whilst its screws are still in place.
Repair is difficult but a possible method might be to glue the pillars back in place with 2-part rapid epoxy glue with the hinge still attached, before removing the screws. Ensure it's supported and correctly positioned while the glue sets. Only then, remove the screws and build up more epoxy as reinforcement around the base of the pilars.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。