メインコンテンツにスキップ
英語
日本語

手順 11を翻訳中

手順11
Now attach the lever to the round piece if you haven't already. The lever should be set for the position you had the other parts set to so in the case of safe as recommend the end of the lever should be in the area marked. Once the lever is in place screw it down with the parts shown on the left in the first picture.
  • Now attach the lever to the round piece if you haven't already.

  • The lever should be set for the position you had the other parts set to so in the case of safe as recommend the end of the lever should be in the area marked.

  • Once the lever is in place screw it down with the parts shown on the left in the first picture.

  • Now plug in a battery and test the selector to make sure safe, full-auto and semi all work properly.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります