メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Locate the WLAN chip. It is a small wireless network card with two small cables connected to it, one black and one white. Using a Phillips #0 screwdriver, remove the single 2mm screw from the WLAN card. The card should pop right up once the screw is removed.
  • Locate the WLAN chip. It is a small wireless network card with two small cables connected to it, one black and one white.

  • Using a Phillips #0 screwdriver, remove the single 2mm screw from the WLAN card.

  • The card should pop right up once the screw is removed.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります