注意:あなたはさきほど閲覧しているガイドの前提となるページを編集しています。あなたが行った変更は、この手順を含むガイド全体に影響を与えます。
手順 6を翻訳中
手順6

Unscrew the logic board connector cover
-
Remove the five screws securing the logic board connector bracket to the rear case:
-
One 1.3 mm Phillips screw
-
One 1.5 mm Phillips screw
-
Three 1.2 mm Y000 screws
-
Remove the bracket.
[title] Unscrew the logic board connector cover |
[* black] Remove the five screws securing the logic board connector bracket to the rear case: |
[* red] |
[* red] |
[* orange] One 1.5 mm Phillips screw |
[* yellow] [* black] Remove the bracket. [* icon_note] Be careful not to lose the [ |
[* yellow] [* black] Remove the bracket. [* icon_note] Be careful not to lose the [ |
クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。