メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

英語
日本語

手順 2を翻訳中

手順2
Once all screws have been removed , place the laptop on a flat surface and insert a metal spudger in a gap between the top side coverings.
  • Once all screws have been removed , place the laptop on a flat surface and insert a metal spudger in a gap between the top side coverings.

  • Once inserted, move the spudger around the base, lifting the top edge about quarter of an inch. Gently go around the edge repeating the action.

  • The sharp popping sound that the latches on the inside will produce is normal and does not signify anything being broken.

  • While some force will be required in this step, make sure not to over-apply pressure since extra force might break the plastic latches.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります