メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Unscrew the three 4mm screws holding down the heat sink of the fan using the Phillips #00 screwdriver. The three 4mm screws found in the heat sink will remain attached to the heat sink. This is okay as long as they are detached from the motherboard.
  • Unscrew the three 4mm screws holding down the heat sink of the fan using the Phillips #00 screwdriver.

  • The three 4mm screws found in the heat sink will remain attached to the heat sink. This is okay as long as they are detached from the motherboard.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります