修理を始めるには

修理する権利

パーツ＆ツール

ご注意：あなたは前提となるガイドを編集しています。あなたが行なう変更は、この手順を含むガイド全体に反映されます。

ガイドに戻る
英語
イタリア語
前の手順 次の手順

手順 4を翻訳中

手順4
In this step, you'll push the logic board free from the clips holding it to the frame. Push only where directed or you may damage the fragile cooling fins. Place a thumb at each end of the exhaust vent, over the fan screw holes. Push firmly in the direction of the ports until the logic board unclips and begins to slide out of the Mac mini.

  • In this step, you'll push the logic board free from the clips holding it to the frame. Push only where directed or you may damage the fragile cooling fins.

  • Place a thumb at each end of the exhaust vent, over the fan screw holes.

  • Push firmly in the direction of the ports until the logic board unclips and begins to slide out of the Mac mini.

In questo passo ti troverai a spingere la scheda logica per liberarla dalle clip che la trattengono al telaio. Agisci solo nei punti indicati, altrimenti potresti danneggiare le fragili lamelle di raffreddamento.

Metti un pollice a ciascuna estremità della bocca di scarico, al di sopra dei fori della ventola. Premi con decisione in direzione delle porte finché la scheda logica non si sblocca dalle clip.

Una volta che è libera dalle clip, fai scorrere la scheda logica fuori dal case.

Nel rimontare la scheda logica, accertati di tenere a distanza di sicurezza il cavo dell'indicatore luminoso a LED per evitare che si danneggi.

[* icon_caution] In this step you will be pushing thestep, you'll push the logic board free from the clips holding it to the frame. '''Push only where directed''' or you may damage the fragile cooling fins.
[* black] Place a thumb at each end of the exhaust vent, over the fan screw holes. Press
[* black] Push firmly in the direction of the ports until the logic board unclips.
[* black] Once the clips are freed,unclips and begins to slide the logic board out of the case.
[* icon_reminder] When reinstalling the logic board, make sure to hold the thin [guide|115309|LED indicator light cable|stepid=222050|new_window=true] out of the way so it doesn't get damagedMac mini.
[* icon_caution] In this step you will be pushing thestep, you'll push the logic board free from the clips holding it to the frame. '''Push only where directed''' or you may damage the fragile cooling fins.
[* black] Place a thumb at each end of the exhaust vent, over the fan screw holes. Press
[* black] Push firmly in the direction of the ports until the logic board unclips.
[* black] Once the clips are freed,unclips and begins to slide the logic board out of the case.
[* icon_reminder] When reinstalling the logic board, make sure to hold the thin [guide|115309|LED indicator light cable|stepid=222050|new_window=true] out of the way so it doesn't get damagedMac mini.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります。