メインコンテンツにスキップ
英語
日本語

手順 1を翻訳中

手順1
Remove all the Phillips 10.0mm and 7.0mm screws on the outside of the case. Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components. Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.
  • Remove all the Phillips 10.0mm and 7.0mm screws on the outside of the case.

  • Make sure the device has been powered off and disconnected from the power source for at least a day before touching the electronic components.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります