Skip to main content
英語
日本語

手順 4を翻訳中

手順4
Use tweezers to push the rod Up a bit. Use tweezers to pull the rod all the way  up until the door releases.  Do not remove the rod.. let the end remain in the hole. To install the new door use a small piece of tape to hold the spring in place on the door. Make sure it is positioned as shown in the picture. Make sure none of the tape interferes with the doors operation during installment.
Removing the door
  • Use tweezers to push the rod Up a bit.

  • Use tweezers to pull the rod all the way up until the door releases. Do not remove the rod.. let the end remain in the hole.

  • To install the new door use a small piece of tape to hold the spring in place on the door. Make sure it is positioned as shown in the picture. Make sure none of the tape interferes with the doors operation during installment.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります