英語
日本語

手順 4を翻訳中

手順4
Unplug the fan from the circuit board by gently pulling on the wire connector at the base of the port. Do not tug on the wires.  Slowly increasing force as you pull is the best way to detach the wires.
  • Unplug the fan from the circuit board by gently pulling on the wire connector at the base of the port.

  • Do not tug on the wires. Slowly increasing force as you pull is the best way to detach the wires.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります