メインコンテンツにスキップ
英語
ドイツ語

手順 1を翻訳中

手順1
Remove old the belt from the two gears by prying it off using the metal spudger. The new belt will be very tight and difficult to put back on. In order to reinstall, start with the belt on one gear, then slowly rotate the other gear, pushing on the belt and allowing it to catch the teeth.
  • Remove old the belt from the two gears by prying it off using the metal spudger.

  • The new belt will be very tight and difficult to put back on. In order to reinstall, start with the belt on one gear, then slowly rotate the other gear, pushing on the belt and allowing it to catch the teeth.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります