メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
日本語

手順 3を翻訳中

手順3
If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around. Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.
  • If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around.

  • Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.

スパッジャーの先端を使って、ロジックボード先端付近のソケットからアンテナケーブルの接続を引き上げて外します。

[* icon_note] If you are following this guide to replace the Lightning connector, you can choose to keep the antenna cable connected and skip the next two steps. Be very careful not to strain the delicate antenna cable when you move the loudspeaker around.
[* black] Use the point of a spudger to lift and disconnect the antenna cable from its socket near the top of the logic board.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります