メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての6個のガイドに反映されます。

英語
日本語

手順 5を翻訳中

手順5
Remove the following Phillips screws securing the speaker to the rear case:
  • Remove the following Phillips screws securing the speaker to the rear case:

  • Two 2.6 mm screws

  • One 2.3 mm screw

  • One 2.3 mm screw

  • This screw is different from the prior one. Be sure not to mix the two together.

  • One 3.0 mm screw

リアケースにスピーカーを固定している次のネジを外します。

2.6 mmネジー2本

2.3 mmネジー2本

3.0 mmネジー1本

[* black] Remove the following Phillips screws securing the speaker to the rear case:
[* red] Two 2.6 mm screws
[* orange] TwoOne 2.3 mm screwsscrew
[* yellow] One 2.3 mm screw
[* icon_note] This screw is different from the prior one. Be sure not to mix the two together.
[* green]
One 3.0 mm screw
[* orange] TwoOne 2.3 mm screwsscrew
[* yellow] One 2.3 mm screw
[* icon_note] This screw is different from the prior one. Be sure not to mix the two together.
[* green]
One 3.0 mm screw

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります