メインコンテンツにスキップ
英語
日本語

手順 4を翻訳中

手順4
Use light pressure to lift the board from the screw standoffs and gently pull backwards to remove the board from the case.
Remopve board from the case.
  • Use light pressure to lift the board from the screw standoffs and gently pull backwards to remove the board from the case.

  • When reassembling the device make sure you correctly line up the RJ45 ports with the front of the case and the board is properly sittingon the screw standoffs before reinserrting the screws.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります