メインコンテンツにスキップ

注意:あなたは必要条件ガイドを編集しています。あなたが行なう変更は、この手順を含む全ての7個のガイドに反映されます。

英語
中国語

手順 6を翻訳中

手順6
Use a spudger or fingernail to pry the digitizer cable connector up from its socket. This connector's recessed location makes it tricky to reconnect. Take your time and align it carefully, then gently press it into place with your fingertip—first one side, then the other. You should feel it click into place.
  • Use a spudger or fingernail to pry the digitizer cable connector up from its socket.

  • This connector's recessed location makes it tricky to reconnect. Take your time and align it carefully, then gently press it into place with your fingertip—first one side, then the other. You should feel it click into place.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

使用撬棒或者指甲来将数字转换器排线链接头从插座上翘起。

此连接器的位置使重新安装连接变得棘手。 请花点时间仔细对齐,然后用指尖先轻轻按压一侧到位,然后另一侧。 您应该能够感觉到链接到位。

如果在维修后屏幕的任何部分触屏失灵,请断开电池,然后重新安装此连接器,确保其完全卡入到位并且插座中没有灰尘或其他异物。

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります