メインコンテンツにスキップ
英語
日本語

手順 2を翻訳中

手順2
Using a T30 Torx driver, remove the bolt that secures the clip in place. Remove the clip.  Do this by rotating the clip toward the front of the car - don't worry if you can't get it completely out.  You can remove the clip after the left seatback is removed.  Just be sure you can get the left seatback loose. Remove the clip.  Do this by rotating the clip toward the front of the car - don't worry if you can't get it completely out.  You can remove the clip after the left seatback is removed.  Just be sure you can get the left seatback loose.
  • Using a T30 Torx driver, remove the bolt that secures the clip in place.

  • Remove the clip. Do this by rotating the clip toward the front of the car - don't worry if you can't get it completely out. You can remove the clip after the left seatback is removed. Just be sure you can get the left seatback loose.

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります