メインコンテンツにスキップ
英語
日本語

手順 9を翻訳中

手順9
Here's some notes about the triple square tool and bolts. I've tried a number of triple square drivers over the years, mostly with poor results.  Good ones are expensive!
  • Here's some notes about the triple square tool and bolts.

  • I've tried a number of triple square drivers over the years, mostly with poor results. Good ones are expensive!

  • Here's a rather inexpensive triple square driver set (around $30): VIMXZN100 from Amazon

  • I had a set from SK Tools that was very poor - the drivers were very loose when you put them in the bolt head you were trying to remove. They'd slip and strip the head of the bolt. Not recommended!

  • Please note that these triple square bolts are extremely tight and difficult to remove. It's not that their just tight, they have lock-tight or something on them that make them hard to remove all together. They don't just "break loose".

  • The official VW repair manual states these bolts are to be replaced and not re-used. VW part number for these: N 910 260 03. Available from World Impex.

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

ここに翻訳を挿入する

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります