メインコンテンツにスキップ
英語
イタリア語

手順 12を翻訳中

手順12
Align the display and press it down firmly onto the adhesive.
  • Align the display and press it down firmly onto the adhesive.

  • To improve bonding of the adhesive you can use an iOpener to warm up the display. Then apply some pressure for a few hours (placing it under one or two heavy books overnight might be a way).

Allinea lo schermo e premilo con fermezza sull'adesivo.

Per migliorare la qualità dell'incollaggio puoi usare un iOpener per scaldare il display e quindi tenerlo premuto di nuovo per circa un minuto.

[* black] Align the display and press it down firmly onto the adhesive.
- [* icon_reminder] To further improve the adhesive bond, you can use an iOpener to warm up the display and then press it down again for about a minute.
+ [* icon_reminder] To improve bonding of the adhesive you can use an iOpener to warm up the display. Then apply some pressure for a few hours (placing it under one or two heavy books overnight might be a way).

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります