メインコンテンツにスキップ
英語
イタリア語

手順 10を翻訳中

手順10
Use a pair of tweezers to place the metal plate covering the battery connector back in its original position. Install the Tri-point #000 screw.
  • Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.

  • Install the Tri-point #000 screw.

  • At this point you might want to turn on the watch and check if everything is working, before sealing it shut.

Usa delle pinzette per rimettere nella sua posizione originale la piastra metallica che copre il connettore della batteria.

Rimetti al suo posto la vite tri-wing #000.

-[* black] Use tweezers to place the metal plate covering the battery connector back in its original position.
+[* black] Use a pair of tweezers to place the metal plate covering the battery connector back in its original position.
[* red] Install the Tri-point #000 screw.
+[* icon_reminder] At this point you might want to turn on the watch and check if everything is working, before sealing it shut.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります