メインコンテンツにスキップ
英語
フランス語

手順 6を翻訳中

手順6
Use a pair of tweezers to carefully remove the protective liner from the bottom of your new Force Touch gasket, exposing the adhesive underneath.
Installing the new gasket
  • Use a pair of tweezers to carefully remove the protective liner from the bottom of your new Force Touch gasket, exposing the adhesive underneath.

  • Make sure the gasket is oriented with the connector pins facing away from you, or you'll remove the liner from the wrong side.

Prenez une pincette pour retirer délicatement le film de protection en dessous de votre nouveau joint Force Touch.

[title] Installing the new gasket
-[* black] Use a pair of tweezers to carefully remove the protective film from the bottom of your new Force Touch gasket.
+[* black] Use a pair of tweezers to carefully remove the protective liner from the bottom of your new Force Touch gasket, exposing the adhesive underneath.
+ [* icon_note] Make sure the gasket is oriented with the connector pins facing away from you, or you'll remove the liner from the wrong side.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります