メインコンテンツにスキップ
英語
イタリア語

手順 4を翻訳中

手順4
Apply a little bit of isopropyl alcohol (>90%) to a Q-tip or use a cleaning pad to gently remove any remaining adhesive from the former force touch gasket. To remove the adhesive on the side under the display cables, hold the display nearly closed and pull it gently away from the edge while you clean it.
Cleaning the case
  • Apply a little bit of isopropyl alcohol (>90%) to a Q-tip or use a cleaning pad to gently remove any remaining adhesive from the former force touch gasket.

  • To remove the adhesive on the side under the display cables, hold the display nearly closed and pull it gently away from the edge while you clean it.

Applica un po' di alcol isopropilico (>90%) su un cotton fioc oppure usa un panno adesivo di pulizia per rimuovere ogni traccia di adesivo dalla guarnizione del Force Touch.

Per rimuovere l'adesivo dal lato sotto i cavi del display, tieni il display quasi chiuso e spingilo delicatamente in avanti rispetto al bordo da pulire.

[title] Cleaning the case
-[* black] Apply a little bit of isopropyl alcohol (>90%) to a Q-tip or use a [product|IF145-308|cleaning pad|new_window=true] to gently remove any remaining adhesive for the Force Touch gasket.
+[* black] Apply a little bit of isopropyl alcohol (>90%) to a Q-tip or use a [product|IF145-308|cleaning pad|new_window=true] to gently remove any remaining adhesive from the former force touch gasket.
[* icon_note] To remove the adhesive on the side under the display cables, hold the display nearly closed and pull it gently away from the edge while you clean it.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります