メインコンテンツにスキップ
英語
イタリア語

手順 3を翻訳中

手順3
Carefully pull the Force Touch gasket over and around the display. If the display is already detached because you're replacing it, it's easier to leave the new display disconnected for now. Connect the display after the Force Touch gasket is replaced (five steps down). Flip the display almost shut so that you can safely peel the Force Touch gasket from the remaining edge.
  • Carefully pull the Force Touch gasket over and around the display.

  • If the display is already detached because you're replacing it, it's easier to leave the new display disconnected for now. Connect the display after the Force Touch gasket is replaced (five steps down).

  • Flip the display almost shut so that you can safely peel the Force Touch gasket from the remaining edge.

  • Remove the Force Touch gasket.

Facendo molta attenzione, tira la guarnizione del Force Touch al di sopra e quindi attorno al display.

Ripiega il display fino quasi a chiuderlo in modo da poter staccare la guarnizione del Force Touch dal bordo rimanente.

Rimuovi la guarnizione del Force Touch.

[* black] Carefully pull the Force Touch gasket over and around the display.
+ [* icon_reminder] If the display is already detached because you're replacing it, it's easier to leave the new display disconnected for now. Connect the display after the Force Touch gasket is replaced (five steps down).
[* black] Flip the display almost shut so that you can safely peel the Force Touch gasket from the remaining edge.
[* black] Remove the Force Touch gasket.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります