メインコンテンツにスキップ
英語
イタリア語

手順 2を翻訳中

手順2
Lift up the connector plate of the Force Touch gasket. Slide your tweezers or a pry tool underneath the gasket to separate the glue underneath. Separate the glue all around the perimeter of the watch except the edge where the display cables lie, to avoid ripping them by accident.
  • Lift up the connector plate of the Force Touch gasket.

  • Slide your tweezers or a pry tool underneath the gasket to separate the glue underneath.

  • Separate the glue all around the perimeter of the watch except the edge where the display cables lie, to avoid ripping them by accident.

Solleva la piastra di connessione della guarnizione del Force Touch.

Spingi la punta di uno spudger sotto la guarnizione per staccarla dalla colla sottostante.

Separa la colla tutto attorno al perimetro all'orologio eccetto il bordo dove ci sono i cavi del display, per evitare di strapparli accidentalmente.

[* black] Lift up the connector plate of the Force Touch gasket.
-[* black] Push the tip of a spudger underneath the gasket to separate the glue underneath.
+[* black] Slide your tweezers or a pry tool underneath the gasket to separate the glue underneath.
[* black] Separate the glue all around the perimeter of the watch ***except*** the edge where the display cables lie, to avoid ripping them by accident.

クリエイティブコモンズのオープンソース著作権のもと、あなたの投稿は著作権の対象となります